We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Mountain Bike Helmet Sizing Chart: How to Measure and Fit Your Helmet

Use this mountain bike helmet sizing chart to measure your head, match it to brand sizes, and check fit so your helmet sits snug and stays put on the trail.

Updated November 2026

A mountain bike helmet sizing chart tells you which helmet size to buy, but only after you measure your head correctly. In this guide, you will measure your head circumference, match it to a size chart, and run a simple fit check so the helmet stays level and secure on rough trails. Most fit problems come from skipping the measurement or ignoring the brand’s own chart.

Step 1: Measure Your Head Circumference

Head circumference is the number that matters most on any mountain bike helmet sizing chart. Measure it where helmets sit: about one finger-width above your eyebrows and ears, around the widest part of your head.

Shopping for one? See our guide: 4 Best Fox Racing Mountain Bike Helmet Picks for Trail Riders (2026).

  1. Wrap a soft tape measure around your head at that level, keeping it flat and level all the way around.
  2. Keep the tape snug but not tight enough to compress your hair.
  3. Read the measurement in centimeters, then in inches if the chart uses inches. Take it twice to confirm.

If you are between two sizes, measure again later in the day. Heads can feel slightly larger after long rides or hot weather.

Step 2: Match Your Measurement to the Brand Chart

Helmet sizes vary by brand, so never assume a “medium” from one company matches another. Always use the chart published by the manufacturer you are buying from. Manufacturers typically list ranges such as small, medium and large in centimeters, and many give separate ranges for youth and adult fits.

Head circumference (cm) Typical size label
51–55 Small (check brand chart)
55–59 Medium (check brand chart)
59–62 Large (check brand chart)

The ranges above are general examples only. Use the exact numbers from the brand you choose. For more detail on measuring, see How to Measure Head for Bike Helmet: A Step-by-Step Sizing Guide and Bike Helmet Sizing Chart: How to Measure and Pick the Right Size (2026).

Step 3: Check the Fit on Your Head

A helmet that matches your measurement can still fit poorly, so test it before you ride. Put it on with the front edge about two finger-widths above your eyebrows. Then check these points:

  • The helmet sits level, not tilted back to expose your forehead.
  • The retention system tightens evenly, with the dial pulling the back band snug around the lower skull.
  • The side straps form a small V just below each ear, with the buckle sitting under your chin.
  • With the chin strap fastened, you can open your mouth wide without the helmet shifting.
  • Shake your head side to side and front to back. The helmet should move with your head, not slide independently.

If the helmet rocks or the pads press hard on one spot, try a smaller size or a different internal fit system before you ride.

Step 4: Adjust the Fit for Full-Face and Youth Helmets

Full-face mountain bike helmets have a heavier shell and a chin bar, so their weight shifts the balance. Check the fit with the chin bar attached and make sure the helmet does not pull forward when you look down. For youth riders, the principle is the same, but children grow quickly. Re-measure every season and check the brand’s youth chart separately from adult sizes. For guidance by rider type, see Youth Full Face Mountain Bike Helmet: How to Choose and Fit One Safely and Mountain Bike Helmet vs Road Bike Helmet: Key Differences and How to Choose.

Common Mistakes to Avoid

  • Measuring too low on the forehead or too high on the crown, which changes the reading.
  • Using one brand’s chart to pick a size for a different brand.
  • Choosing a helmet that feels loose, expecting the padding to compress and tighten it.
  • Ignoring the chin strap angle, which can let the helmet slide during a crash.
  • Keeping an old helmet after a hard impact. Replace it according to the manufacturer’s guidance.
  • Soft tape measure: A flexible tailor’s-style tape gives you a more accurate circumference reading than a stiff ruler or string. View on Amazon
  • Fit-check mirror or helper: A second person or a full-length mirror makes it easier to confirm the helmet sits level. View on Amazon

FAQ

Can I use a mountain bike helmet sizing chart from a different brand?

It is not recommended. Each manufacturer sets its own size ranges, so a medium in one brand may fit like a small or large in another. Always use the chart from the brand you plan to buy.

What if my head measurement falls between two sizes?

Try both sizes and run the fit check on each. Choose the one where the helmet sits level and the retention system tightens evenly without pressure points.

How do I know when a helmet is too big?

If the helmet shifts when you shake your head, or sits low on your forehead even after tightening the dial, it is likely too large. Consult the manufacturer’s fit guidance or a local bike shop if you are unsure.

Conclusion

Measure your head circumference at the correct height, match that number to the specific brand’s chart, and then run a fit check before riding. A properly sized helmet sits level, stays put when you shake your head, and fastens comfortably under the chin. If you have a health condition or are unsure about fit for a child, consult a qualified bike fitter or a professional.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our bike helmets & cycling safety guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Bike Helmet Snow.