We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Fulgaz Bike Computer Display: How to Read and Set It Up

Learn how to read the fulgaz bike computer display, set up your metrics and screens, and avoid common mistakes so you can ride with the right data at a glance.

Updated November 2026

The fulgaz bike computer display shows your speed, cadence, heart rate, power and other ride data, and it is the screen you rely on while your eyes should mostly stay on the road. This guide explains how to read the display, set up the data fields that matter to you, and arrange them so you can check them quickly without losing focus. If you are new to a bike computer, start with the basics below and then fine-tune the layout.

Understand the Main Display Layout

Most riders see the display as a set of data fields stacked on one or more screens. The largest field is usually your primary metric, often speed or power, while smaller fields show secondary values such as cadence, distance or elapsed time. Check your device manual for the exact labels, since fulgaz lists fields on its own menus and these can change with software updates.

Shopping for one? See our guide: Bike Computer vs Watch (2026): Which Is Better for Cycling?.

Before you ride, confirm three things: which fields appear on the main screen, which sensors are connected, and whether the values update when you pedal. A field showing dashes or zeros usually means a sensor is not paired or not transmitting.

Set Up Your Data Fields Step by Step

Good setup comes down to choosing a small number of fields and placing them where you can read them at a glance. Work through the steps below while the bike is stationary.

  1. Open the data screen settings and select the number of fields per screen. Two to four fields per screen is easier to read than six or more.
  2. Put your most important metric in the top or largest position. For most road riders this is speed or power; for indoor training it is often power or target zone.
  3. Add cadence, time or distance as secondary fields. Avoid filling every slot with numbers you will never look at mid-ride.
  4. Create a second screen for a different task, such as a navigation or map view, rather than cramming everything onto one page.
  5. Save the layout, then check it by pedaling in a safe spot and confirming each value changes as expected.

Pair Sensors and Confirm the Readings

Sensors such as heart rate straps, cadence sensors and power meters must be paired before the display will show their values. Pair each one while standing still, away from other ANT+ or Bluetooth devices that could cause interference. After pairing, ride a few minutes and compare the readings to what you expect. A heart rate that jumps to a suspicious value or a cadence that reads zero while you are clearly pedaling points to a loose sensor or low battery.

Keep spare batteries for your sensors, and check battery levels before long rides. Sensor battery types differ, so confirm the correct cell size in the manufacturer’s documentation.

Mount the Display Where You Can Read It Safely

The display should sit where a quick downward glance gets you the information you need, without shifting your head or hands. A stem or handlebar mount in the center of your field of view usually works best. Make sure the mount does not block brake levers, shifters or the front wheel path, and that the cable or sensor wires do not rub or snag.

Placement Advantage Watch for
Top of stem Easy glance, clear view Can interfere with bar tape or headset cap
Handlebar center Stable and close to eyes May block cable routing
Out-front mount Clear of cockpit clutter Needs secure mounting and a clean angle

Common Mistakes to Avoid

  • Showing too many fields at once, which makes each value harder to read at speed.
  • Leaving sensors unpaired or unchecked, then discovering the problem halfway through a ride.
  • Mounting the display where it blocks brake or shift controls.
  • Changing layouts on the road instead of setting them up before you leave.
  • Ignoring software updates, which can change menu names and field options.

A secure, adjustable mount keeps the display steady over rough pavement and makes it easier to find the right angle. View on Amazon

Spare sensor batteries help you avoid losing heart rate or cadence data on a long ride. View on Amazon

FAQ

Why does my fulgaz bike computer display show dashes instead of numbers?

Dashes usually mean the field has no data, most often because a sensor is not paired or not transmitting. Re-pair the sensor, check its battery, and confirm it is within range.

How many data fields should I show on one screen?

Two to four fields per screen is a practical range for most riders. More fields can make values harder to read quickly while riding.

Should I set up the display before or during a ride?

Set it up before you ride, while the bike is stationary. Changing layouts or pairing sensors on the road increases distraction and risk.

Conclusion

A well-arranged fulgaz bike computer display gives you the numbers you need without pulling your attention from traffic. Choose a few key fields, pair and test your sensors, and mount the unit where a quick glance is enough. Revisit your layout after software updates or when your riding goals change.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our bike helmets & cycling safety guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Bike Helmet Snow.