Mountain Bike Helmet Size Chart: How to Measure and Pick the Right Fit
Use this mountain bike helmet size chart guide to measure your head, compare sizes across brands, and check fit so your helmet sits snug and stays put on the tr
Updated November 2026
A mountain bike helmet size chart tells you which helmet size matches your head circumference, but the chart is only the starting point. This guide shows you how to measure your head accurately, read a brand’s sizing table, and confirm the fit once the helmet is on. Done in order, these steps should get you a helmet that sits level, stays snug, and does not shift when you crash or shake your head.
Measure Your Head Circumference
Helmet sizes are based on head circumference, not height or shoe size. Use a soft tape measure or a piece of string and a ruler.
Shopping for one? See our guide: 4 Best Fox Racing Mountain Bike Helmet Picks for Trail Riders (2026).
- Wrap the tape around your head about one inch above your eyebrows and ears, so it runs across the widest part of your forehead and the back of your head.
- Keep the tape level all the way around. It should be snug but not tight enough to press into your skin.
- Read the measurement in centimeters if you can. If you used string, measure the string against a ruler.
- Measure twice. If the two readings differ by more than a few millimeters, measure again.
Read the Brand’s Size Chart Correctly
Each manufacturer publishes its own size chart, and the ranges do not match across brands. A “medium” from one company can fit a different head circumference than a “medium” from another. Always use the chart for the specific helmet model you are buying.
| Typical size label | Head circumference (general example) |
|---|---|
| Small | about 51–55 cm |
| Medium | about 55–59 cm |
| Large | about 59–62 cm |
| X-Large | about 62–64 cm |
These ranges are illustrative only. Manufacturers specify their own numbers, so confirm the exact range on the product page before ordering. If your measurement falls at the edge between two sizes, most fit guides suggest trying the smaller size first and checking the fit.
Check Fit After the Helmet Is On
A size chart narrows the choice, but the fit test decides it. Adjust the retention system first, then run through these checks.
- Level position: The front edge should sit about one or two finger-widths above your eyebrows. It should not tilt back or sit low on your forehead.
- Snug all around: The padding should contact your head evenly with no pressure points. Shake your head side to side; the helmet should move with your head.
- Strap position: The side straps should form a V just below each ear. Buckle the chin strap so you can fit one or two fingers between the strap and your chin.
- Retention test: Grip the front edge and try to rotate the helmet forward and back. If it shifts more than a little, tighten the dial or try a smaller size.
Adjust for Full Face and Youth Helmets
Full face helmets have a different shell shape and often a heavier weight, so the fit can feel different from an open face model. Check the chin bar clearance and make sure the helmet does not push your jaw forward. The rules above still apply, but expect a little more pressure at the chin area.
Youth helmets follow the same method, but children’s heads grow quickly. Measure again each season, and check the chart for the specific youth model rather than relying on the adult size label.
Common Mistakes
- Measuring over hair, a hat, or a loose cap, which adds size.
- Assuming a size from one brand carries over to another.
- Skipping the retention test and trusting the chart alone.
- Buying a helmet that feels loose on the day you try it on, expecting the padding to compress into a fit.
- Ignoring the manufacturer’s replacement guidance after a crash, even when the helmet looks undamaged.
Recommended gear
A flexible tape measure makes the first step quicker and more accurate, and a fit-check helmet bag helps you transport your helmet without warping the shell.
- A soft sewing-style tape measure, which wraps cleanly around the head. View on Amazon
- A padded helmet carrying bag, which protects the shell from knocks during transport. View on Amazon
FAQ
Can I use a bike helmet size chart from another brand?
It is not reliable. Each manufacturer sets its own size ranges, so use the chart published for the exact helmet model you plan to buy.
What if my head measurement falls between two sizes?
Try the smaller size first and check the fit with the retention system adjusted. If it pinches or sits too high, move up one size.
How do I know when a helmet no longer fits?
If the helmet rocks or shifts with the retention system tightened, or if it no longer sits level, it needs re-fitting or replacement. Consult the manufacturer or a local bike shop professional for help with a specific model.
Conclusion
Measure your head circumference carefully, match it to the chart for the specific helmet model, and then check the fit with the straps and retention system. A helmet that is level, snug and stable on your head is the one that protects you best on the trail. For more fit detail, see How to Size a Bike Helmet Correctly: A Step-by-Step Fit Guide and Mountain Bike Helmet Sizing Chart: How to Measure and Fit Your Helmet.
Related reading
- Fox Mountain Bike Helmet Size Chart: How to Find Your Fit
- Bike Helmet Sizing Chart: How to Measure and Pick the Right Size (2026)
- Youth Dirt Bike Helmet Sizing Chart: How to Measure and Fit Your Rider (2026)
Ready to choose one?
