Reset OnGuard Bike Lock: Step-by-Step Guide to Change Your Combination
Learn how to reset an OnGuard bike lock combination in a few steps, what to check first, and common mistakes to avoid so you don't get locked out.
Updated November 2026
To reset an OnGuard bike lock, you set a new combination using the lock’s current code, or you use the reset process for your specific model if you no longer know the old one. Most OnGuard combination locks follow a similar pattern: you unlock the shackle, enter the current code, then dial in a new three- or four-digit combination. This guide covers how to reset an OnGuard bike lock, what to check before you start, and what to do if you have forgotten the original code.
Before You Start: Identify Your Lock Type
OnGuard makes several lock styles, and not all of them reset the same way. Combination U-locks and cable locks usually have a reset mechanism built into the body. Keyed locks do not have a combination at all, so you will need a replacement key rather than a reset. Check the lock body for a dial, a row of number wheels, or a key slot. If you see wheels, you are working with a combination lock.
Shopping for one? See our guide: OnGuard RockSolid 8590 Bike Lock: 5 Best U-Locks Compared (2026). For a deeper look, How to Reset a Bike Lock: Step-by-Step Guide for Combination and Key Locks covers this in detail.
Look for the model number printed on the lock or on the original packaging. Manufacturers often change reset procedures between product generations, so the model number tells you which instructions apply. If you have lost the packaging, check OnGuard’s official website for the manual matching your lock.
How to Reset an OnGuard Combination Lock
If you still know your current combination, the reset is straightforward. Keep the lock in a clean, dry spot where you can see the dials clearly, and work slowly so you do not accidentally scramble the wheels.
- Set the lock to its current combination and open the shackle so it is fully unlocked.
- Locate the reset or change button, which is usually a small recessed button on the lock body or under the dial cover.
- Press and hold the reset button while you turn the dials to your new combination.
- Release the reset button, then test the new combination by locking and unlocking the shackle several times.
- Record the new combination somewhere secure, not on the lock itself.
If You Forgot the Current Combination
Without the original code, you cannot use the standard reset method. Many OnGuard combination locks do not allow a reset without the current combination, which is a deliberate security feature. Your options are limited. You can check the original paperwork or any registration you completed at purchase. If the lock has a sealed number tag, it may list the factory default code. Contact OnGuard customer support with your model number and proof of purchase to ask about their process. Some riders instead replace the lock, which is often the more practical choice for an older or damaged unit.
What to Check If the Reset Does Not Work
A reset can fail for simple mechanical reasons. Dirt, grit, or corrosion inside the dial mechanism can prevent the wheels from turning freely. Spray a small amount of dry lubricant into the dial area, work the wheels back and forth, and try again. Avoid heavy oil, which attracts dust and can make the lock stiffer over time.
Temperature also matters. Locks stored in very cold conditions can feel stiff, so bring the lock indoors for a while before attempting a reset. If the shackle will not release even with the correct combination, the internal mechanism may be jammed, and it is worth having the lock inspected or replaced rather than forcing it.
Tips for Keeping Your Combination Lock Working
- Write the combination down and store it separately from the bike, such as in a password manager.
- Set a memorable combination, but avoid obvious sequences like birthdays or 1-2-3-4.
- Change the combination after a lock has been shared or lent out.
- Test the lock at home before you rely on it at a bike rack.
- Keep dust and road grime off the dials by wiping them after rides.
Common Mistakes to Avoid
- Turning the dials while the shackle is still locked, which can misalign the wheels.
- Forcing the reset button instead of pressing it gently and holding it in place.
- Storing the new combination on a sticker attached to the bike, which defeats the lock’s purpose.
- Assuming a keyed lock can be reset like a combination lock.
Recommended Gear
A dry lubricant spray helps clean and free up the dial mechanism without leaving a sticky residue that collects grit. View on Amazon
A small microfiber cloth works well for wiping dirt off the dials and shackle after rides, which keeps the wheels turning smoothly. View on Amazon
FAQ
Can I reset an OnGuard lock without knowing the combination?
Usually not. Most OnGuard combination locks require the current code to set a new one. Contact OnGuard support with your model number and proof of purchase to ask about any alternatives.
Where do I find the model number on my lock?
Check the lock body, the shackle base, or the original packaging. The model number determines which reset instructions apply to your lock.
What if my OnGuard lock is stuck after a reset?
Clean and lubricate the dial mechanism, let the lock warm up if it is cold, and try again slowly. If it still will not open, have it inspected or replace it.
Conclusion
Resetting an OnGuard combination lock is quick when you know the current code and follow the reset steps for your model. If you have lost the combination, check your paperwork and contact OnGuard before assuming the lock is unusable. For riders who want to compare other options, our guides to resettable combination locks and U-locks can help you choose a lock that fits your routine and your security needs.
Related reading
- Reset Bike Lock Combo: 5 Best Resettable Combination Locks (2026)
- Where to Put Bike Lock While Riding: A Safe Carry Guide for 2026
- Where to Put Bike Lock When Riding: A Safe, Comfortable Setup
- Replacement Bike Lock Key Picks: 7 Best Options Compared (2026)
Ready to choose one?
