Bell 20 Function Bike Computer Manual: Where to Find It and How to Use It
Find the bell 20 function bike computer manual, learn what each mode and button does, and set up your bike computer correctly before your next ride.
Updated November 2026
The bell 20 function bike computer manual is the fastest way to learn what your display is showing, how to switch between its modes, and how to set wheel size and units correctly. This guide explains where to look for the manual, how to work through it, and which settings matter most for accurate readings. Once you finish, you should be able to set up the computer in about 15 minutes and read it confidently at speed.
Where to Find the Manual
Start with the box. Most bike computers ship with a folded printed guide, sometimes in several languages. If that is missing, check the brand’s support pages for a PDF listed under the model name, and confirm the exact model number printed on the back of the unit or the packaging before downloading anything. Model numbers matter because similar-looking computers can have different button layouts. If you cannot find a match, the Bell Dashboard 150 Bike Computer Manual: Where to Find It and How to Set It Up article walks through the general approach for a related Bell unit, which can help you orient yourself.
Shopping for one? See our guide: Bike Computer vs Watch (2026): Which Is Better for Cycling?.
Set Up the Basics Before You Ride
Do not skip the initial setup. A bike computer is only as accurate as the values you give it, and the most important number is wheel circumference. Your manual should include a chart of common tire sizes with circumference values in millimeters. Measure your own wheel if your tire is not listed, and enter that number exactly.
Setup checklist
- Install the batteries or charge the unit fully, following the polarity or charging instructions in the manual.
- Enter the date, time and display units (miles or kilometers).
- Set wheel size or circumference using the value from the manual or your own measurement.
- Confirm the speed reading by riding a known distance, such as a marked road segment or a short loop you have measured on a map.
- Mount the sensor and magnet according to the manual’s spacing instructions, usually within a few millimeters of the magnet.
Learn the Function Modes
A 20-function display can feel overwhelming, but most of those functions are variations on a small group of measurements. Group them mentally into speed, distance, time, and power or cadence if your model supports it. Use the manual’s function map to identify which button cycles through modes and which one resets or confirms a selection. Many owners find it useful to set two or three screens they check most often and to ignore the rest on a normal ride.
| Category | What to check | When it helps |
|---|---|---|
| Speed | Current, average and maximum speed | Pacing and effort control |
| Distance | Trip and total odometer | Training logs and maintenance intervals |
| Time | Ride time and clock | Planning and rest breaks |
| Other | Calories, cadence or temperature, if supported | Secondary training data |
Reset and Maintain Your Readings
Reset the trip values at the start of each ride or training block so the data stays meaningful. Keep the total odometer running and note the figure when you service the bike, since chain and tire replacement intervals depend on accumulated distance. If readings suddenly drop to zero or jump, the sensor alignment or battery is the usual cause. Check the troubleshooting section of the manual before assuming the unit has failed.
Common Mistakes
- Using the wrong wheel size, which skews every speed and distance figure.
- Mounting the sensor too far from the magnet, causing intermittent dropouts.
- Forgetting to switch units after changing displays or sharing a computer with another rider.
- Assuming the factory default settings match your bike.
- Discarding the manual before saving a PDF copy for future reference.
Recommended Gear
- A replacement magnet and sensor set helps when a mounting bracket breaks or a sensor is lost, so keep one on hand. View on Amazon
- A stem or handlebar mount that matches your bar diameter keeps the display steady over rough pavement. View on Amazon
FAQ
Can I find the bell 20 function bike computer manual online?
Yes. Search the brand’s support site using the exact model number printed on the unit. Save a PDF copy so you can read it on a phone during a ride.
What wheel size should I enter if I am unsure?
Measure the wheel circumference or use the tire size chart in the manual. Verify the result by riding a measured distance and comparing it with the display.
Why does my speed reading drop out intermittently?
The sensor is usually too far from the magnet or misaligned. Adjust the spacing according to the manual and check that the battery is fresh.
Conclusion
Keep the manual handy until you are comfortable with the button layout and the main screens. Set the wheel size carefully, test the readings on a known distance, and reset trip values at the start of each ride. A few minutes of setup now saves confusion later.
Related reading
- Schwinn 20 Function Bike Computer Manual: Where to Find It and How to Use It
- Specialized Bike Computer Manual: Where to Find It and How to Use It
- Wahoo Bike Computer Comparison (2026): Which Is Better for Road Riders?
- Rockbros M1 Gps Bike Computer: Setup Steps, Mounting and Key Settings
- Out Front Bike Computer Mount: A Practical Guide (2026)
- Garmin Edge 520 Bike Computer vs Edge 530: Which Should You Choose?
Ready to choose one?
