We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Design a Bike Helmet: A Step-by-Step Guide for Beginners

Learn how to design a bike helmet step by step, from shell shape and ventilation to fit, impact standards and testing, so your concept protects riders.

Updated November 2026

To design a bike helmet, you need to balance three things: impact protection, a comfortable fit and a shell that meets recognized safety standards. This guide walks through the core decisions in order, from defining your rider and use case to choosing materials, shaping the liner and planning certification. By the end, you will have a clear design brief you can prototype and test.

Start With the Rider and Riding Style

Every helmet design begins with a specific rider. A road helmet prioritizes low weight and airflow, while a downhill mountain bike helmet needs full coverage of the jaw and back of the head. Kids’ helmets require a smaller head circumference range and different retention geometry. Write down the target head sizes, the riding environment and the impact scenarios you expect, because these determine nearly every later choice.

Shopping for one? See our guide: Troy Lee Designs Stage Full Face Mountain Bike Helmet Review (2026).

Shape the Shell and Choose Materials

The outer shell spreads impact force and protects the liner from abrasion. Most designers use either in-mold polystyrene or a polycarbonate outer shell bonded to expanded polystyrene (EPS) foam. Consider the following when sketching the shape:

  • Coverage: Extend the rear coverage to protect the occipital area, but keep the sides clear of the ear and peripheral vision.
  • Vents: Place intake vents at the front and exhaust vents at the rear, and align channels so air flows across the scalp.
  • Weight: Target a total mass that suits the discipline. Heavier full-face designs trade weight for protection.

Test your foam density in mind before finalizing thickness. Thicker EPS absorbs more energy but adds bulk, so the liner and shell must be designed together.

Design the Fit System and Liner

A helmet only protects if it stays in place. Plan the internal liner to contact the head evenly across the forehead and temples, with a retention system that holds the shell without pinching. Include an adjustable dial or ratchet at the back, sized so it can tighten across a head circumference range you have defined. Add a chin strap with a secure buckle and check that straps sit in a Y shape around each ear. For another angle, check out 18 Best Bike Helmets.

Key fit checks to build into the design

  1. Measure the target head circumference range in centimeters.
  2. Confirm the retention system tightens within that range.
  3. Verify the helmet sits level on the forehead, roughly two finger widths above the eyebrows.
  4. Check that the chin strap stays snug with the mouth open.

Plan Safety Standards and Testing

Any helmet sold for cycling must meet a recognized standard. In the United States, the Consumer Product Safety Commission (CPSC) governs bicycle helmet requirements, and standards such as ASTM F1447 and CPSC 16 CFR 1203 set impact and retention performance levels. Other markets use EN 1078 or other regional standards. Early in development, choose which standard you will certify against, because it dictates impact test headforms, drop heights and anvil shapes. Plan for independent lab testing, and expect to revise the foam and shell after early failures.

Common Mistakes to Avoid

  • Designing the shape before defining the head size range.
  • Adding vents that weaken the shell without checking impact performance.
  • Overloading the helmet with lights, mounts or cameras that change its balance.
  • Skipping retention testing, which can fail even when impact results pass.
  • Ignoring visibility, such as light-colored or reflective finishes for low-light riding.

Prototyping benefits from accurate head measurement and a way to check fit before tooling. A flexible tape measure lets you record circumference at the widest point above the eyebrows. View on Amazon

A digital caliper helps you check EPS wall thickness and shell dimensions during prototyping. View on Amazon

For background on how real helmets handle fit and protection, you can compare existing designs such as the Smith Road Bike Helmet Guide: Fit, Features and How to Choose (2026) and the TLD Mountain Bike Helmet: How to Choose, Fit and Use One Safely. Reviewing how commercial helmets manage ventilation and retention can sharpen your own brief.

FAQ

Do I need to certify a homemade bike helmet?

Yes, if you plan to sell it. Helmets sold in the US must meet CPSC requirements, which means independent testing and labeling. Consult a qualified testing laboratory before any sale.

What foam is used in bike helmets?

Most helmets use expanded polystyrene (EPS) because it crushes to absorb impact energy. Some designs add multi-density foams to improve performance across different impact speeds.

How do I know if a helmet fits correctly?

It should sit level on the forehead, feel snug without pressure points and stay in place when you shake your head. The chin strap should fit securely without slipping.

Conclusion

Designing a bike helmet starts with a clear rider profile, then moves through shell shape, liner and retention, and ends with standards-based testing. Keep fit and protection in balance at every stage. Work with an accredited lab before selling anything, since safety certification is not optional.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our bike helmets & cycling safety guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Bike Helmet Snow.